Assuming you're running a saw with enough oomph to plunge into the trunk and do.
Sep 30, Special tree pruning BLADES: 9 inch shrubclean.bar inch shrubclean.bar Sawzall I used: shrubclean.bar Sawzall cordle.
As far as digging around it and sawing it off--sure it can be done-been there and done that but why not just shoot yourself in the foot with a shotgun-it will be almost as much fun.
May 15, Here is an easy way to remove small stumps. Simply grab a sawzall with a long blade and cut it out. Sure beats digging it out with a pick and shovel. Jun 03, Ive used my Milwaukee Sawzall for the same thing 3 years ago removing tree stumps in my shrubclean.bar great with a long big toothed typed blade.
My north lying neighbor has her garage oriented to my house in a similar fashion to my garage-spaced about 6 feet.
As far as dirt in the motor,just blow the housing out when done with an air compressor,mine's still cuttin away after 3. Sep 04, Clear around the roots as best you can with your shovel/rake/prybar/compressed air/etc., and start cutting sections of the stump out where possible.
Sooner or later you will get through it. Assuming you're running a saw with enough oomph to plunge into the trunk and do vertical cuts, you could hold the saw vertically and cut across the stump in a grid fashion and then start prying out the Estimated Reading Time: 8 mins.
Feb 13, So the answer is yes. You can use a reciprocating saw to cut small-sized trees and prune tree branches, limbs, laser cut tree stand bushes. You should use a rough wood blade with TPI or a variable TPI wood pruning blade. Depending on the toughness of the wood, you should opt for a high carbon steel blade or a Bi-metal blade for the best results. Apr 27, Do not use your reciprocating saw to cut a tree or branch that is more than 12 inches in diameter.
If you have a bigger tree than advised, then consider using a more appropriate tool like a chainsaw. Using a reciprocating saw on a large tree or branch will just lead to you sawing shrubclean.barted Reading Time: 8 mins. Aug 10, Trying to use a chain saw will destroy the blade and bar in seconds, even cutting to close to the ground when cutting a tree down will destroy it.
If you did use a carbide tipped pruning blade to cut out the outside shape, then what, your still stuck with a hole full of hard packed dirt. A clay bit would work sort of work, but your going to.