DPReview Digital Photography.
Used this tool to pull and replace the tailshaft bushings in both my '84 Mustang with the T-5 and my '57 Thunderbird with the Fordomatic. Tool works excellent. Make sure to grease the threads on the puller and go slow with hand tools only.
Skip to main content.
Both bushings pulled right out with no issues. Driver tool put the new ones back in square and easy/5(12). Dec 11, It's just as easy to remove the tailshaft housing from the transmission and remove the bushing standing up, instead of laying under the car.
Last one I did, all I used was a screw driver and hammer to remove it, once it was out of the car. Come think of it, I don't see how either of those tools will fit into the tailhousing with the mainshaft in there too.
Removes transmission extension housing bushing.
The tool is inserted through the bushing and the drive screw is tightened to draw the bushing out of the housing." ID with" OD at the pulling teeth. Similar to Applications include Ford Ranger transmissions: 4R44E/5R44E; 5R55E; A4LD; C3; T5OD; 6F35; 6F15Missing: tailshaft. Jun 14, The seal im going to replace and should be no problem but i am taking about the bushing that sits behind the seal. That one either i take off the rear part of the transmission and take it to a machine shop so they can replace the bushing, or i read that with one of those special tools you can remove the bushing and insert a new one without removing part of the shrubclean.barted Reading Time: 11 mins.
Feb 14, Replace without Housing Removal; Easy How To Replace Automatic Transmission Extension Housing Tailshaft Bush Bushing & Seal; DIY Replace Automatic Transmis Author: YepThatsIt. May 11, The bushing goes on the left part of the tool. This is a remover and installer all in one. I don't have any pics from changing out the bushing, but I can guarantee it works perfectly. The downside of this tool?
Cost me just overFor a tool I'll be lucky to use once or twice more. Ah well, at least it can keep the rest of my tools company.