No notes for slide.

Sep 11, Removal Tool for pulling / pushing out axle pivot bushings on a TTB front shrubclean.bared Rodnylon nut or weld one on socket the size of the bushingreceiver fro. May 16, Like any suspension bushing, the I-beam pivot bushings on your Ford truck or Bronco wear out over time. This video will show you how to visually inspect and. Nov 04, I couldn't stand the lose bucket on my bobcat so i thought i would replace the front pivot pins and bushings.I hope this can help some one.

Figure 4: QUIK‑ALIGN style pivot connection hardware (narrow bushing shown) noTe: Refer to Figure 44 on page 22 for an exploded view of the HT Y-beam QUIK-ALIGN pivot connection. 1. Remove the TORQ-RITEnut from the pivot bolt. 2. Remove the pivot bolt from the frame bracket. 3. carefully remove the concentric and eccentric alignment collars. Remove pivot hardware (Figure 1). Rotate arm beams down and out of hanger. Inspect pivot bolt hole and hanger surfaces for wear or damage.

Repair or replace components, if needed. Figure 2 Bushing clamp Aduster Plate anger Air Spring Shoc Asorber Pivot Bushing Asseml Mounting Plate (Air Spring) Trailing Arm Beam Asseml (Right-Hand) xle Pivot Bolt (Shear-Type) Pivot Nut. Jun 06, the beam eye. Line up locator mark on new bushing with line drawn on beam during bushing removal (Figure 2). Thread the plunger onto the threaded rod. Rotate the plunger until the plate is seated snugly against the bushing.

5. Use a 3/4” drive impact wrench on the hex nut to rotate the threaded rod and press the bushing into the beam eye. Jul 14, Some of the older models, for example, the coupler pivot bushings are steel and relatively thin, and they have to be pulled out, can't drive them out.

On those I simply clean all the grease out of the pivot pin socket and use a carbide burr in a die grinder to cut a slot in the bushing, that way it will relax and pull right out, no worries at all. Brass Replacement Door Pin Bushing Removal Tool for jeep. Xprite USA. Videos for related products. Click to play video. Adjustable lower pivot pins and door collars are used to provide a snug fit Bestop’s 2-piece soft door offers full enclosure from the elements or quick upper-half removal Reviews: